Balance Weight on the Rear Final Drive

Fig 1: Identifying Rear Final Drive Balance Weight

GWWA39-10466

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 22 Nm
Balance Weight
- Depending on the date of manufacture; for allocation
Rear Final Drive
- Removing and installing, refer to FINAL DRIVE
Crossmember
Balance Weight
- Depending on the vehicle; allocation
Bolt
- Tightening specification -item 4- in FINAL DRIVE 0BC, 0BD OVERVIEW .
Balance Weight
- Depending on the date of manufacture; for allocation
Washer
Bolt
- Tightening specification -item 4- in FINAL DRIVE 0BC, 0BD OVERVIEW .