Fuel Injection System, Component Location Overview: Notes
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Engine Compartment
- Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Component location, refer to OVERVIEW - ENGINE COOLANT TEMPERATURE SENSOR
- Removing and installing, refer to Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING .
- Right Electrohydraulic Engine Mount Solenoid Valve -N145-
- Removing and installing, refer to ENGINE, SECURING ON ENGINE AND TRANSMISSION HOLDER .
- Mass Airflow Sensor -G70-
- Removing and installing, refer to Mass Airflow Sensor -G70-, REMOVING AND INSTALLING .
- Differential Pressure Sensor -G505-
- Component location, refer to Differential Pressure Sensor -G505-, REMOVING AND INSTALLING
- Overview, refer to OVERVIEW - HEATED OXYGEN SENSORS AND EXHAUST GAS TEMPERATURE SENSORS .
- Exhaust Gas Temperature Sensor 4 -G648-
- Overview, refer to OVERVIEW - HEATED OXYGEN SENSORS AND EXHAUST GAS TEMPERATURE SENSORS .
- Engine Speed Sensor -G28-
- Overview, refer to OVERVIEW - GLOW PLUG, CAMSHAFT POSITION SENSOR AND ENGINE SPEED SENSOR .
- Exhaust Gas Temperature Sensor 1 -G235-
- Removing and installing, refer to appropriate service information. .
- Exhaust Gas Temperature Sensor 3 -G495-
- Overview, refer to OVERVIEW - HEATED OXYGEN SENSORS AND EXHAUST GAS TEMPERATURE SENSORS .
- Brake Booster Pressure Sensor -G294-
- Accelerator Pedal Position Sensor -G79- /Accelerator Pedal Position Sensor 2 -G185-
- Component location, refer to appropriate service information.
- Instrument Cluster with Instrument Cluster Control Module -J285-
- Removing and installing, refer to INSTRUMENT CLUSTER WITH INSTRUMENT CLUSTER CONTROL MODULE -J285-, REMOVING AND INSTALLING .
- Brake Lamp Switch -F-
- Component location, refer to appropriate service information.
- Engine Control Module -J623-
- Component location, refer to Removing [See Second Graphic figure 14]
- Removing and installing, refer to Engine Control Module -J623-, REMOVING AND INSTALLING .
- Heated Oxygen Sensor -G39- with Oxygen Sensor Heater -Z19-
- Overview, refer to OVERVIEW - HEATED OXYGEN SENSORS AND EXHAUST GAS TEMPERATURE SENSORS .
- Left Electrohydraulic Engine Mount Solenoid Valve -N144-
- Removing and installing, refer to ENGINE, SECURING ON ENGINE AND TRANSMISSION HOLDER .
- Charge Air Pressure Sensor -G31- / Intake Air Temperature Sensor -G42-
- Component location, refer to appropriate service information.