Engine, Securing On Engine And Transmission Holder

Special tools and workshop equipment required 

• Lifting Tackle :3033 
• Engine And Transmission Holder :VAS6095 
• Shop Crane :VAS6100 
• Lift Arm Extension :VAS6101 
• Engine/Transmission Holder - V6 TDI Bracket :VAS6095/1-11 

Procedure

• Engine/transmission assembly removed and separated on :VAS6131B  .
• Engine secured with :VAS6131/13-7  .

-- Attach the :VAS6101  to the :VAS6100  .

Courtesy of AUDI OF AMERICA, LLC

-- Engage the :3033  on the engine lifting eyes and on the shop crane as shown in the illustration.

-- Tension engine slightly with shop crane, do not raise.

Wire Routing Version 1 

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the left and right connectors -2- for the Left Electrohydraulic Engine Mount Solenoid Valve -N144- /Right Electrohydraulic Engine Mount Solenoid Valve -N145- and remove them from the bracket.

-- Remove the nut -1- and remove the bracket with the wiring harness from the subframe.

Wire Routing Version 2 

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the left and right connectors -2- for the Left Electrohydraulic Engine Mount Solenoid Valve -N144- /Right Electrohydraulic Engine Mount Solenoid Valve -N145- and remove them from the bracket.

-- Remove the bolt -1- and remove the bracket with the wiring harness from the subframe.

Continuation for All Vehicles 

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left and right bolt -2- from the engine mount.

-- Remove the :VAS6131/13-7  from the engine.

Courtesy of AUDI OF AMERICA, LLC

-- Raise engine from engine carrier.

-- Remove the bolts -arrows- and the left engine support.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the right engine support.

Courtesy of AUDI OF AMERICA, LLC

-- Secure the starter on the engine.

-- Secure the engine to the :VAS6095  using the :VAS6095/1  and :VAS6095/1-11  and tighten to 40 Nm, as illustrated.

Courtesy of AUDI OF AMERICA, LLC