Overview - Engine Coolant Temperature Sensor

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Engine Coolant Temperature Sensor

Courtesy of AUDI OF AMERICA, LLC

Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Removing and installing. Refer to Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING .
Clip
- Make sure it is secure
O-ring
- Always replace
O-rings
- Always replace
Engine Coolant Temperature Sensor -G62-
- Removing and installing. Refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .
Bolt
- 9 Nm
O-rings
- Always replace
Engine Temperature Control Sensor -G694-
- Removing and installing. Refer to Engine Temperature Control Temperature Sensor -G694-, REMOVING AND INSTALLING .
Bolt
- 9 Nm

Fig 2: Transmission Fluid Cooling Valve Bolts Tightening Torque

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -3- to 20 Nm.