Reducing Agent Pump -V437-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications. Refer to OVERVIEW - REDUCING AGENT ACTIVE TANK AND ATTACHMENTS .
-- Make sure the lines are clipped to the active tank.
-- Adapt the adaptation value after draining reducing agent or replacing components. Refer to SELECTIVE CATALYTIC REDUCTION- ADAPTATION VALUE, RESETTING .