Selective Catalytic Reduction- Adaptation Value, Resetting
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
The adaptation value in the Engine Control Module (ECM) must be adapted with the Vehicle Diagnostic Tester when the reducing agent is drained or one of the components listed below is replaced.
- Active tank
- Reducing agent pump
- Reducing agent injector
- Reducing agent line
- Engine control module
-- Perform the adaptation using the Vehicle Diagnostic Tester, using "Guided Functions ".