Reducing Agent Passive Tank, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications. Refer to OVERVIEW - REDUCING AGENT PASSIVE TANK AND ATTACHMENTS .
-- Install the left underbody trim in the center. Refer to UNDERBODY TRIM PANEL OVERVIEW .
-- Make sure the lines are clipped to the passive tank.
After Filling, the Following Steps Must Be Performed
-- Adapt the adaptation value after draining reducing agent or replacing components. Refer to SELECTIVE CATALYTIC REDUCTION- ADAPTATION VALUE, RESETTING .