LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (3.0L - Exhaust System & Emission Controls - Engine Code: CNRB) >> 26 Exhaust System, Emission Controls >> Exhaust Gas RECIRCULATION (EGR) >> EGR Motor -V338-, REMOVING AND INSTALLING >> Installing

EGR Motor -V338-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Pay attention to the installed position of the EGR Motor -V338-.

-- Install the intake manifold. Refer to INTAKE MANIFOLD OVERVIEW .