Wheel Housing Trim, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC, ELECTRICAL AND MECHANICAL RESTRAINT SYSTEM COMPONENTS, SAFETY PRECAUTIONS AND TESTING PROCEDURES .
Vehicles with Fixed Second Row
-- Remove corresponding second row seat.
- Seat beach (two-thirds bench). Refer to SECOND ROW, 3 PASSENGER OVERVIEW .
- Individual seat. Refer to SECOND ROW, 2 PASSENGER OVERVIEW .
Vehicles with Longitudinally Adjustable Second Row
-- Move second row seat forward on side to be removed.
Procedure for All Vehicles
-- Pull wheel housing trim out of mounts in body with Trim Removal Wedge3409.
-- Remove belt anchor/seat belt screw -1- on body.
-- Remove wheel housing trim -2- and pull seat belt -3- through opening -arrow A- in trim.