Rear side trim, assembly overview

1 - Side trim

• Removing 

• Remove rear bench seat → Rear seat bench, assembly overview .
• Remove rear seat backrest → Rear seat backrest, assembly overview .
• Remove decorative panel → Decorative panel, removing and installing .
• Unclip center piece - 4  -.

• Remove bolt - 5  -.
• Reach into side trim - 1  - and unclip side trim - 1  - at clips - 2  - , - 7  - and - 6  -.
• Remove side trim - 1  -.

• If side trim - 1  - is to be replaced:

• Remove anchorage point for outer floor panel → Front anchorage point for outer floor panel .

• Installing 

• Pull back clip - 6  - to loosen clip - 6  -.
• Install side trim - 1  - in reverse order of removal.

2 - Clip

3 - Decorative panel

4 - Center piece

5 - Bolt

6 - Clip

7 - Clip