Rear seat bench, assembly overview

Fig 1: Rear Seat Bench, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Rear seat bench

• Removing 

• Pull rear seat bench - 1  - up and remove rear seat bench - 1  -.
• With seat heating: Detach connector for seat heating.

• Installing 

• Place protective cover - 4  - below buckles - 3  - (2x).
• Install piping at buckle cover Cord at fabric cover of belt buckles, removing and installing 
• With seat heating: Connect connector for seat heating.
• Push rear seat bench - 1  - under rear seat backrest - 2  - and feed in buckles - 3  - (2x).

• Engage rear seat bench - 1  - in grommets - 5  - (3x).

2 - Rear seat backrest

3 - Buckles (2x)

4 - Protective cover

5 - Grommets (3x)