Floor covering, assembly overview
1 - Floor mat
- Removing
- Remove front seats → Front seat, assembly overview .
- Remove rear seat backrest → Rear seat backrest, assembly overview .
- Remove rear bench seat → Rear seat bench, assembly overview .
- Remove sill panel trims → Sill panel trim, removing and installing .
- Remove lower A-pillar trims → Lower A-pillar trim, assembly overview .
- Remove foot rest → Removing and installing foot rest .
- Remove foot rest holder → Foot rest holder, removing and installing .
- Remove center console → Center console, assembly overview .
- Detach wiring harness under center console.
- Remove bolts (2x) at air ducts - 2 - (2x) and remove both air ducts - 2 - (2x).
- Unscrew bolts - 3 - (2x).
- Fold floor mat - 1 - length ways and remove floor mat - 1 - from vehicle.
- Installing
NOTE:
- Floor covering is liable to tear slightly at cut-outs. Install floor mat carefully.
- Install floor mat - 1 - in reverse order of removal.
2 - Air ducts (2x)
3 - Bolts (2x)