Lower A-pillar trim, assembly overview

Fig 1: Lower A-Pillar Trim, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Sill panel trim

2 - Clips (3x)

3 - Clip

4 - Lower A-pillar trim

• Removing 

• Unclip sill panel trim - 1  - at clips - 2  - (3x).
• Lift front sill panel trim - 1  -.
• Unclip lower A-pillar trim - 4  - at clip - 5  -.
• Press retainer tab on clip - 3  - and remove lower A-pillar trim - 4  -.

• Installing 

• When installing, ensure that rubber door surround is in full contact with lower A-pillar trim - 1  -.
• Install lower A-pillar trim - 1  - in reverse order of removal.

5 - Clip