Coolant fan, removing and installing
WARNING: This page is about a different car, the 2010 Audi A8, 2009 Audi A8, 2008 Audi A8, and 2007 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Drain coolant → Cooling system, draining and filling .
- Remove radiator → Radiator, removing and installing .
- Remove fan shroud → Fan shroud, removing and installing .
- Remove bolts - arrows -.
- Unclip electrical harness connectors and expose electrical wires.
- Remove coolant fan.
Installing
- Tightening torques → Radiator and coolant fan, assembly overview .
Installation is in reverse order of removal, note the following:
- Install fan shroud → Fan shroud, removing and installing .
- Install radiator → Radiator, removing and installing .
- Fill with coolant → Filling .