Fuel Pump/Fuel Gauge Sending Unit Replacement
- Remove the fuel tank unit (see
REMOVAL )
- Remove the fuel level sensor (fuel gauge sending unit) (A) from the fuel tank unit (B)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check these items before installing the fuel tank unit
- When connecting the wire harness, make sure the connection is secure and the connector (C) is firmly locked into place
- When installing the fuel gauge sending unit, make sure the connection is secure Be careful not to bend or twist it excessively
- Install the parts in the reverse order of removal When installing the fuel tank unit, align the marks on the unit and the fuel tank (see
INSTALLATION )