Fuel Tank Unit Removal and Installation: Removal

Relieve the fuel pressure (see FUEL PRESSURE RELIEVING ).
Remove the rear seat cushion (see REAR SEAT CUSHION COVER REPLACEMENT )
Remove the access panel (A) from the floor

Fig 1: Identifying Access Panel And Fuel Tank Unit 4P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the fuel tank unit 4P connector (B)
Disconnect the quick-connect fitting (C) from the fuel tank unit
Using the special tool, loosen the locknut (A)

Fig 2: Identifying Locknut With Special Tool
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the locknut (A) and the fuel tank unit (B)

Fig 3: Identifying Locknut And Fuel Tank Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.