Installing, continued
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Oil Dipstick Pipe, Bracket With Transmission Connectors & Ground Lead To Transmission
Lower the car.
Tighten return oil pipe cap nut on control system cover.
Install:
- Oil dipstick pipe with new O-ring.
Tightening torque : 25 Nm
- Bracket with transmission connectors. Connect all connectors. Secure wiring from control system in bracket.
- Ground lead to transmission.