Secure the gearbox to the engine

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gearbox Retaining Bolts With Torque Specifications

Courtesy of VOLVO CARS OF NORTH AMERICA.

Thread the four retaining bolts and tighten to 50 Nm .

Remove the support 9995972 .

D4192T.

Press on the gearbox/engine mounting and secure with four bolts. Tightening torque 27 Nm .