Fit the hydraulic clutch cylinder to the gearbox
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Position the hydraulic clutch cylinder and pipe.
Note: depress the piston as far as possible.
Fit the bolt to the support.
Remove the lock clip from the clutch cylinder.
Fit the two bolts.
Tighten the bolts to 30 Nm .
Insert the hose into the support and fit the lock clip.