Fit the central longitudinal member
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fit the engine mounting to the engine support point.
Fit the two bolts (correct size).
Fit the four bolts:
- front: long bolts
- rear: short bolts.
Tighten the bolts to:
- on body side, 69 Nm
- on engine side, 52 Nm .
First, tighten the rear bolts and then the front bolts.