Removing mounting screws from gearbox/starter motor
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fold the connectors, cable harness and cable conduit out of the way of the engine / gearbox.
Remove:
- the 3 screws for the gearbox / engine
- the 2 screws for the starter motor One screw is located under the starter motor
- the ignition setting sender. Remove it from the mounting.