Removing 6 screws for torque converter, and 7 screws for gearbox/engine

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Torque Converter Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the lower plastic nut. Bend out the right inner wing.

Turn the engine with a ratchet and socket. Use a Torx TX50 socket on the torque converter screws (see the illustration).