Hood Assembly: Installation

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Install:

the hood
the screws for the hinges. Tighten to 24 Nm
the gas strut on the ball
the retaining clip for the gas strut. Check that the clip locks the gas strut
the hose for the windshield washer.

Remove the support from the hood.

Adjust the hood according to Adjusting the hood .