Install the Central Front-Rear Member

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Central Front-Rear Member

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the central front-rear member on the front engine mounting. Press the engine forward. Secure the central front-rear member on the rear engine mounting.

Install the four screws for the central front-rear member. Tighten to 69 Nm.

Tighten the screws in the engine mountings. Tighten to 55 Nm.

Install:

the front splashguard for the engine
the heat deflector plate for the output shaft. Tighten to 10 Nm.