Removing the Front Exhaust Pipe

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Pipe Bracket

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the mounting for the heated oxygen sensor (HO2S) in the pipe bracket.

NOTE: Do not damage the wiring for the front and rear heated oxygen sensors (HO2S).

Fig 2: Removing/Installing Front Rubber Mountings For Exhaust Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the two front rubber mountings for the exhaust pipe
the nuts on the flange for the manifold
the exhaust pipe. Leave the exhaust pipe hanging from its mountings.