Installing the Exhaust Pipe

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Front Rubber Mountings For Exhaust Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the exhaust pipe on the manifold flange. Tighten to 25 Nm
the front rubber mountings for the exhaust pipe. Tighten to 13 Nm
the cable mounting for the front heated oxygen sensor (HO2S) in the pipe mounting.

NOTE: Use new gaskets.