Wheel Spindle Ball Joint, Check
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Install the nut. Use a torque gauge 9998081 to measure the ball joint torque.
Torque during rotation must be between 1.0 and 3.0 Nm.
The control arm must be replaced if the torque is outside these values.
| Ball Joint/Link Arm | ||
|---|---|---|
| Maximum permitted play | axially | 0.5 mm |
| radially | 0.5 mm | - |
| - | - | - |