Install the Front Bushing In the Control Arm

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: To ensure that there is no exhaust leakage, see Flanged Joint, Assembling .

Fig 1: Installing Front Bushing In Control Arm

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the pin. Connect special tool 9995626 . Lubricate the bushing using the soap solution and install it on the pin. Position 9995625 on the pin and press the bushing onto the control arm. The bushing must be parallel to the control arm.

Remove 9995626 by removing the pin.