Installing the Central Front-Rear Member

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Central Front-Rear Member

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the central front-rear member and the two screws in the engine mountings.

Install the front-rear member with the long screws at the front and the short screws at the rear.

Tighten to 69 Nm.

Tighten the two mounting screws for the engine at the front and rear.

Tighten the rear screw first.

Tighten to 55 Nm.

Install:

the front engine splash guard
the wheel, remove the support.
For model year -1997, see Remove .

For model year 1998-, see Remove .