LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Steering - Removal, Replacement And Installation (644 Body)) >> Steering Gear (B4204T2 CVVT, Aw50-42; 2000) >> Removing And/Or Installing the Power Steering Pump, Gasoline Powered Cars >> Install the Poly V-Belt On the Power Steering Pump

Install the Poly V-Belt On the Power Steering Pump

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Poly V-Belt
GLL115250Courtesy of VOLVO CARS OF NORTH AMERICA.

Clean the pulley.

Install the Poly V-belt.

Tension the belt tensioner. Remove the locking pin.

Check that the belt is unimpeded.

scientia non olet · About LEMON Manuals