LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Steering - Removal, Replacement And Installation (644 Body)) >> Steering Gear (B4204T2 CVVT, Aw50-42; 2000) >> Checking Power Steering Balance And Pump Pressure >> Checking the Pump Pressure >> Fill And Bleed the Servo System

Fill And Bleed the Servo System

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Filling Power Steering System
GLL116391Courtesy of VOLVO CARS OF NORTH AMERICA.

Fill the servo reservoir with oil. Bleed the system. See the specifications for the oil grade.

Apply the parking brake. Start the engine.

Turn the steering wheel from lock to lock several times.

Check that the function is OK and that there is no leakage.

Check the oil level. Top up if required.

NOTE: Power steering fluid, quality ATF F, G, Dexron D/E Ford Mercon