LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Steering - Removal, Replacement And Installation (644 Body)) >> Control System (B4204T3 (Ca) (Us); 2001-2003) >> Oil Pressure Line Power Steering, Replacing (RHD) >> Removal >> Removing the Delivery Line From the Power Steering Pump (B4184SM/SJ)

Removing the Delivery Line From the Power Steering Pump (B4184SM/SJ)

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Delivery Line From Power Steering Pump (Does Not Apply To B4184SM/SJ)
GLL116463Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the pipe clamp (A).

Remove the pipe mounting (B) from the pipe support.

Install 1158957 on the inlet hose. Clamp the hose.

Collect the oil in a container.

Disconnect and release the pipe connection nut (C). Pull out the pipe.

Remove the O-ring and plug the openings to prevent oil running out.

Move the pipe to one side.



Fig 1: Removing Delivery Line From Power Steering Pump (B4184SM/SJ)
GLL116464Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the pipe clamp (A).

Remove the pipe clamp (B) on the distributor side.

Remove the pipe clamp (C) at the generator bracket.

Install 1158957 on the inlet hose. Clamp the hose.

Collect the oil in a container.

Remove the pipe screw (D). Remove the pipe.

Plug the holes to prevent oil running out.

Move the pipe to one side and allow as much oil as possible to drain out.