LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Steering - Removal, Replacement And Installation (644 Body)) >> Control System (B4204T3 (Ca) (Us); 2001-2003) >> Ball Joint Tie Rod, Protective Bellow Or Tie Rod, Replacing >> Installation >> When Replacing the Right-Hand Tie Rod

When Replacing the Right-Hand Tie Rod

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Install the support so that it is secure. Tighten to 25 Nm  . Install both brackets on the support.

Tighten to: M6 screw 10 Nm  , M8 screw 15 Nm  .

scientia non olet · About LEMON Manuals