LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Springs - Removal, Replacement And Installation (644 Body)) >> Suspension, Shock Absorbers And Anti-Roll Bar (2000) >> Removing And Installing the Anti-Rollbar Link >> Install the Steering Shaft On the Pinion Shaft

Install the Steering Shaft On the Pinion Shaft

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Steering Gear Housing At Steering Column
GLL116390Courtesy of VOLVO CARS OF NORTH AMERICA.

Press the steering column further down onto the pinion shaft.

Install the screw. Tighten to 17 Nm.