Tighten the Lower Control Arm
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
Remove the support and bounce the car a few times.
Secure the anti-roll bar.
Tighten:
- the screw C. Tighten to 25 Nm
- the screw B on the trailing arm. Tighten to 90 Nm
- the screw A on the shock absorber. Tighten to 90 Nm
.