Installing the valve lifters and camshafts

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate the valve guide wells.

Install all the valve lifters.

NOTE: Make sure that the lifters are in the same position as before.

Fig 1: Identifying Intake And Exhaust Camshafts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the camshaft bearing seats.

Install the intake camshaft. Ensure that the groove at the rear edge of the camshaft is above an imaginary center line.

Position the exhaust camshaft. Ensure that the groove at the rear edge of the camshaft is below an imaginary center line.