Installing the camshaft press

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Camshaft Turned Until Stopped Against Camshaft Press

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the lower section of camshaft press 9995765 at the intake valves for cylinder 1.

Tighten the tool against the cylinder head. Tighten to 17 Nm .

Turn the camshaft until it stops against the camshaft press.

Fig 2: Identifying Camshaft Tightening Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the upper section of the camshaft press.

Tighten the screw which tensions the camshaft. Tighten to 12 Nm .