LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Engine - Inspection And Adjustment (644 Body)) >> Checking And Adjusting Components (B4204T2 CVVT; 2000) >> Valve Clearance, Setting/Adjusting >> Correcting the measured clearance

Correcting the measured clearance

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Lift out the upper section of the press tool.

Lift out the camshaft.

Adjust the play by replacing the valve lifters.

Other valve lifters are available as replacement part/replacement part kits.

Reinstall the camshaft and the upper section of the press tool. Tighten to 12 Nm  .

Take a new measurement according to Valve clearance, checking .

scientia non olet · About LEMON Manuals