LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Ignition And Control Systems - Design And Function (644 Body)) >> Diagnostic Functions (B4204T2 CVVT; 2000) >> Reading off the Volvo on-board diagnostic (OBD) system >> Activating components and functions

Activating components and functions

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

This function allows the system components and functions to be activated individually.

The following components can be activated:

NOTE: After Activation is completed, the DSA function is disconnected. The DSA function is re-engaged using the DSA switch. If no diagnostic trouble codes (DTCs) have been stored, the DSA warning lamp goes out after engagement.

For further information about activation, see Activating components/functions .