Installing the timing belt
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the screw securing the inner timing cover to the cylinder head
- idler pulley. Tighten to 25 Nm
- the timing belt tensioner. Screw in the center screw by hand. Ensure that the fork on the tensioner centers above the cylinder block rib. Check that the Allen hole on the eccentric is at "10 O'CLOCK"
- the vibration damper according to Installing the vibration damper .
Install the timing belt according to Install timing belt at lower side .