Installing the air intake hose
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate the air intake hose with a soap solution. Press the air intake hose into place on the turbocharger (TC). Tighten to 6 Nm
- Install the EVAP hoses
- Connect the connector
- Reinstall the vacuum hoses on the turbocharger (TC) control valve according to the markings.
Install:
- Install the air cleaner (ACL) assembly. See Installing the air cleaner (ACL) housing
- Top up the cooling system. See Filling with coolant
- Check the adjustment of the turbocharger (TC). See Checking and adjusting the boost pressure control (BPC) valve on the turbocharger (TC)
- Install the engine cover.