Installing the exhaust system assembly
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Always use new gaskets
- Install all the components. Finger-tighten only
- Hang the exhaust system on the rubber mountings.
Tightening the exhaust system assembly:
| - |
B4194T2, B4204T2, B4204T3, B4204T5 |
| D |
60 Nm |
| E |
55 Nm |
- Tighten the mounting screw for the rubber mounting. Tighten to 13 Nm
.