Installing the boost pressure control (BPC) valve on the turbocharger (TC)
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the vacuum hose and the clamp to the boost pressure control (BPC) valve
- Install the boost pressure control (BPC) over the pin and on the turbocharger (TC)
- Install the two screws (A). Tighten the screws. Tighten to 25 Nm .