Installing heated oxygen sensor (HO2S) cable and connector
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Adjust wiring connections so that it does not come into contact with the exhaust system.
- Route cable and tighten at 3 places
- Connect connector and tighten cable to bracket
- Reinstall relay cover.