LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Intake And Exhaust System - Removal, Replacement And Installation (644 Body)) >> Intake & Exhaust (B4204T2 CVVT; 2000) >> Installing new oil gaskets on PCV system >> Removing intake manifold

Removing intake manifold

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Remove the intake manifold, see Replacing the intake manifold and gasket .

Remove: 

Fig 1: Identifying Oil Trap
GLL114698Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that the oil trap gasket surfaces are clean.