Replacing the component
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off
- Check the connector of boost pressure sensor 2 (MAP) and the control module for contact resistance and oxidation as described in Contact resistance and oxidation
.
If no faults are found on the connectors, try a new boost pressure sensor 2 (MAP).
Other information
- For boost pressure sensor 2 (MAP) replacement, see Boost pressure sensor 2, replacing .
- Continue
Refer to Verification