Checking wiring and terminals
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Check DSA control module and ABS control module connectors for contact resistance and oxidation according to. Contact resistance and oxidation .
Check the cable between the DSA control module:
- terminal 2 and ABS control module terminal 25 (diagnostic trouble code (DTC) DSA-311)
- terminal 3 and ABS control module terminal 26 (diagnostic trouble code (DTC) DSA-312)
- terminal 4 and ABS control module terminal 23 (diagnostic trouble code (DTC) DSA-313)
- terminal 12 and ABS control module terminal 24 (diagnostic trouble code (DTC) DSA-314)
for intermittent open-circuit according to Open-circuit, intermittent faults , an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults and an intermittent short-circuit to supply according to Short-circuit to supply voltage, intermittent faults .
Check that the cable is not too close to sources of interference such as electric motors, ignition cables, carphone cables etc.
Other information
- To connect the breakout box for DSA, see Connecting the breakout box. DSA .
- To connect the breakout box for ABS, see Connecting the breakout box. ABS .
- Continue
Refer to Information