Connecting the breakout box. ABS
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Special tools:
Connecting the breakout box
- Ignition off
- Disconnect the ABS control module
- Check the control module and the control module connector to ensure that:
The male and female terminals are undamaged and properly attached (cannot be pressed in).
The wiring for the female terminals is securely connected.
Check in particular those terminals that are relevant to the stored diagnostic trouble code (DTC) / symptoms
- Connect adapter 9511426 to the control module connector (wiring side). Connect breakout box 9813190 to the adapter.