Checking for an open-circuit

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Check the cable between the DSA control module:

terminal 2 and breakout box terminal 25 (diagnostic trouble code (DTC) DSA-311)
terminal 3 and breakout box terminal 26 (diagnostic trouble code (DTC) DSA-312)
terminal 4 and breakout box terminal 23 (diagnostic trouble code (DTC) DSA-313)
terminal 12 and breakout box terminal 24 (diagnostic trouble code (DTC) DSA-314)

for an open-circuit according to Open-circuit, permanent faults .

Other information

To connect the breakout box for DSA, see Connecting the breakout box. DSA .
To connect the breakout box for ABS, see Connecting the breakout box. ABS .

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Checking For Open Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Verification