LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Dynamic Stability Assist (DSA) & Electronic Control Module (ECM) Diagnostic Trouble Codes (644 Body)) >> DSA-211: Stop (Brake) Lamp Switch. Signal Too High (B4204T2 CVVT; 2000) >> Signal too high >> Fault causes and adjusting the stop lamp switch

Fault causes and adjusting the stop lamp switch

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

The cause of the diagnostic trouble code (DTC) was incorrect adjustment of the stop lamp switch.

Adjust the stop lamp switch according to Stop lamp switch, adjustment .

Fig 1: Identifying Stop (Brake) Lamp Switch
GLL115958Courtesy of VOLVO CARS OF NORTH AMERICA.
scientia non olet · About LEMON Manuals